Artificial Graphite H5 for Power Tool Lithium Battery

Artificial Graphite H5 for Power Tool Lithium Battery materials meet all
Power Tool specifications including high capacity (about 354.4 mAh/g)
and high first cycle efficiency (about 95.4%). If you have a demand for Artificial Graphite H5 powder, please feel free to send me an email for quotation.

(Artificial Graphite H5 for Power Tool Lithium Battery)

Artificial Graphite H5 for Power Tool Lithium Battery

Category:

Artificial graphite

Advantages:

High energy density

Low expansion

Long cycle

2.5C-3.0C fast charging

Application:

The
application of Artificial Graphite H5 in electric vehicle batteries is
increasingly important. Graphite is an irreplaceable negative material
in the battery. In addition, H5 artificial graphite is also widely used as a lithium ion battery negative material for electric tools.

Tips:

The
material design first discharge capacity is recommended to be
350-353mAh/g, and the tap density is recommended to be controlled in
1.60-1.65 g/cc and below. This product is suitable for aqueous solution
lithium battery system.

Packaging requirements:

H5
artificial graphite shall be packed into a plastic bag with a
specification of 650mm×950mm, sealed and then placed into a carton with a
weight of 25+0.02kg/ box, or according to customer requirements
packaging.

Transportation and storage:

a.
The product should be stored in a place where dry, ventilated and no
other pollution sources (recommended: temperature ≤ 45 ° C, humidity
≤85%);

b. Product stacking should be neat, clean, production lot number, production date, etc. should be clearly identified;

c.
During the transportation process, it should be gently put, so as not
to damage the packaging; Any products leaking out of the bag shall not
be returned to the box.

d. The shelf life is 2 years in a normal temperature state.

Packaging and product identification:

H5 product packaging must be marked with the following information:

A) Product Name

B) Batch Number of product

C) Product weight

D) Date

E) Company Name

Matters needing attention:

A)
Ensure that the capacity of the negative electrode per unit area is
greater than or equal to that of the positive electrode per unit area to
avoid lithium evolution during charging.

B) Ensure that there is a good interface between the isolation film and the electrode.

C) The surface density and compaction density of the electrode will affect the performance of the rate capacity and performance.

D)
The product is secondary particle carbonization products, and it is
recommended that the design pressure below 1.60g/cc is the best.

(Artificial Graphite H5 for Power Tool Lithium Battery)

Technical indicators:

Particle Size Distribution:

Discharge Capacity:

XRD: