Artificial Graphite HC15 for Power Lithium Battery

Artificial Graphite HC15 for Power Lithium Battery materials meet all
Power specifications including high capacity (about 354.4mAh/g) and high
first cycle efficiency (about 95.4%). If you have a demand for Artificial Graphite HC15 powder, please feel free to send me an email for quotation.

(Artificial Graphite HC15 for Power Lithium Battery)

Artificial Graphite HC15 for Power Lithium Battery

Category:

Artificial graphite

Advantages:

High energy density

Long battery life

1.5C charging rate

Application:

Artificial
Graphite HC15 is widely used to Power Lithium batteries. Power lithium
battery has the advantages of high energy, high battery voltage, wide
operating temperature range, long storage life and so on. It has been
widely used in military and civil small electrical vehicle (EV)
batteries or large capacity and power batteries in other applicaitosn,
partly replacing the traditional battery.

Tips:

The
material design first discharge capacity is recommended to be 350mAh/g,
and the tap density is recommended to be controlled in 1.60g/cc and
below. This product is suitable for aqueous solution lithium battery
system.

Packaging requirements:

HC15
artificial graphite shall be packed into a plastic bag with a
specification of 650mm×950mm, sealed and then placed into a carton with a
weight of 25+0.02kg/ box, or according to customer requirements
packaging.

Transportation and storage:

a.
The product should be stored in a place where dry, ventilated and no
other pollution sources (recommended: temperature ≤ 45 ° C, humidity
≤85%);

b. Product stacking should be neat, clean, production lot number, production date, etc. should be clearly identified;

c.
During the transportation process, it should be gently put, so as not
to damage the packaging; Any products leaking out of the bag shall not
be returned to the box.

d. The shelf life is 2 years in a normal temperature state.

Packaging and product identification:

H5 product packaging must be marked with the following information:

A) Product Name

B) Batch Number of product

C) Product weight

D) Date

E) Company Name

Matters needing attention:

A)
Ensure that the capacity of the negative electrode per unit area is
greater than or equal to that of the positive electrode per unit area to
avoid lithium evolution during charging.

B) Ensure that there is a good interface between the isolation film and the electrode.

C) The surface density and compaction density of the electrode will affect the performance of the rate capacity and performance.

D)
The product is of secondary particle + single particle structure, and
it is recommended that the design pressure below 1.55-1.60g/cc is the
best.

(Artificial Graphite HC15 for Power Lithium Battery)

Technical indicators:

Particle Size Distribution:

Discharge Capacity:

XRD: